New Delphi Replacement fuel pump kit. Direct replacement, you will need to splice the wires, When I installed this on My Sons car we bench tested it and it did help to add some fuel to prime it before installing the tank. (We had an empty tank) Black wire with yellow stripe is positve wire

..

Price: $98.99

This is an inline fuel filter that can go between fuel tank and fuel pump. This can be used with the in tank screen ( That screen is now obsolete) Or can be used by itself to keep debris out of the pump. I have been running this type of filter for over 10 years with a walbro pump.Micron rating is 10.

You can install this just under the inspection cover so you can easily acess the filter to change it. Offset side is inlet side. Bracket isn't used.

Price: $14.99

Quality Wix Fuel filter. Located in the engine bay. Includes 4 copper banjo gaskets.

Price: $26.99

In tank fuel filter that attaches to stock pick up tube. Designed after the OEM filter that is OBSOLETE and stock screen- Micron rating is unknown. I also suggest the inline filter listed on this page. Click on images to enlarge.

Price: $16.95

In tank fuel filter that attaches to stock pick up tube. Designed after the OEM filter that is now OBSOLETE- This filter has a coarser style Mesh screen for less restriction, I also suggest the inline filter that is listed on this page- I do not have Micron ratings. Click on images to enlarge.

Price: $16.95

Throttle body rebuild kit. Includes injector seals. Please NOTE: Throttle shaft seals are NOT in the kit, I do have them listed below to purchase.

Price: $30.00

1 pair of Throttle shaft seals

Steel seal with rubber coating, I have personally installed these with high tack sealant and pressure tested the throttle body to 50 lbs psi.

Price: $11.49

New injector seal kit. Contains all 3 seals for ONE injector. Order 2 kits if you are removing both injectors

..

Price: $6.49

Reproduction gasket for Fuel pick up tube in fuel tank. Viton material resists ethanol fuel, replaces obsolete OEM gasket OEM ref # MB129548

Price: $7.99

Reproduction gasket for Fuel sending unit. Viton material resists ethanol fuel, replaces obsolete OEM gasket

Price: $6.99

Reproduction formed fuel feed line from fuel tank to fuel pump. This is reproduced by Boosted Diamonds comes with 2 clamps.

Price: $20.99

Fuel filler hose from filler neck to fuel tank along with the overflow hose.includes clamps.

Price: $19.99

Fuel Tank drain plug gasket that I sourced, I used this on my Sons car, I suggest some permatex High Tack gasket sealant on both sides of gasket. Worked great on his Quest. (Drain plug not included)

Price: $2.49

Set of 10 Allen head fuel tank screws and washers for Fuel pick up tube and fuel sending unit, these replace the stubborn phillips head screws. Each unit uses 5 screws and washers.

I considered Stainless steel- but they can corrode mild steel if exposed to moisture.

Price: $3.99

Fuel vent line kit with 12 clamps and enough line to replace the old vent lines on your fuel tank.

Price: $10.99